#Kohls steam iron how to#
#Kohls steam iron generator#
#Kohls steam iron zip#

Such additives can affect the steam properties and at high temperatures, form deposits in the steam generator chamber, which are likely to stain your laundry and cause premature ageing of the appliance. Never use rainwater, pure demineralized water or pure distilled water from shops, or water containing additives (such as starch, perfume or water from other household appliances). We recommend that you start with fabrics to be ironed at a low temperature. Important: The iron takes longer to cool down than to heat up. If ironing mixed-fibre fabrics, set the temperature for the most fragile fibre. We would advise ironing dark clothes inside out and using the correct temperature. Shiny marks can appear on some fabrics, especially on dark coloured fabrics.

Never clean your iron's soleplate with abrasive or metallic pads.

#Kohls steam iron zip#

Avoid ironing over abrasive items (buttons, zip fastenings, etc.).

Always place your iron on its heel rest or its base (depending on model).

To avoid damaging the soleplate, follow this advice: How can I avoid scratching the soleplate of my iron? However, when the iron temperature control is set to the lowest setting you must also set the steam output control dial (depending on the model) to the low position, otherwise water droplets may appear in the steam. This allows you to obtain steam on the lowest heat setting, e.g. Yes this is because the steam is generated in a separate area away from the soleplate of the iron. Note: Never use the vertical steam function on an item being worn by anyone.

Press the steam control button intermittently and move the iron from top to bottom.Īs the steam produced is very hot, it softens the fibres and removes creases.

Leave the item on a hanger and gently pull the fabric with one hand.

To do this, set the iron temperature button to the maximum position. This function allows you to iron fabrics in situ or on a hanger. What is the vertical steam function used for? How do I use it? The ironing board cover should also be suitable to allow the flow of steam through. The board should be perforated to allow the steam to pass through the fibres of the fabric to soften it and make ironing easier.

It should be steady and robust so that you can place the ironing appliance on it.

#Kohls steam iron how to#

How to better use my product What type of ironing board should I use?Ĭhoose a board that is height-adjustable to adjust it to your height.

Most of all, do not use any descaling products to clean the boiler as they could damage it.įind more detailed information in the Guarantee section of this website. If you live in a hard water area, do this more often.

For best results, we recommend that you perform this operation once again.

Shake the base unit gently for a few seconds then empty it completely over the sink.

Use a jug to fill the boiler with tap water until it is 3/4 full.

If your generator boiler has an anti-calc rod, take this out and rinse it under the tap before placing it back in the boiler.

Check that the generator is cool and has been unplugged for more than 2 hours.

Please note: To prolong your boiler's efficiency and avoid scale deposits, you must rinse the boiler every 10 uses (around once a month).

Wipe the plastic parts from time to time using a slightly damp soft cloth.

Never hold the iron or its base unit under a running tap. Such additives can affect the steam properties and at high temperatures, form deposits in the steam generator chamber, which are likely to stain your laundry and cause premature ageing of the appliance.īefore any maintenance, make sure that the appliance is unplugged and that the soleplate, boiler and iron rest have cooled down (at least 2 hours after ironing).ĭo not use any maintenance or descaling product to clean the soleplate or the base unit. If you experience this sort of problem, we suggest you try using untreated tap water or bottled water. This is particularly the case for filter jugs. However, some softeners, especially those that use chemicals such as salt, can cause white or brown stains. There are several types of softeners and the water in most of them can be used in the steam generator. In some seaside regions, the salt content in your water may be high. If your water is very hard (hardness higher than 30°f or 17°dH or 21°e), mix 50% tap water with 50% distilled water (available in stores). Your appliance has been designed to work with tap water.